P4000 Specifications:

• Pump Design: Dual in-line piston, pulseless design. Micro-stepped motor control. Floating piston bayonet-mounted heads. Patented ceramic check valves.
• Flow accuracy: ±0.5% at 1 ml/min with water, after liquid end calibration.
• Flow precision: <0.2% RSD
• Flow Range: 0.01 to 10 ml/min standard. Settable in 0.01 ml/min increments.
• Composition Repeatability: 0.2% RSD
• Gradient Linearity: ±0.5% from 10-90% composition
• Maximum Pressure: 6000 psi, 420 bar, 42MPa with standard heads
• Wetted Surfaces: Stainless steel or PEEK, titanium, ceramic, sapphire, Teflon, Tefzel, and polyethylene
• Pressure Pulsation: <2% amplitude; <1% typical at 1ml/min water or methanol at >500 psi
• Delay Volume: <0.6ml
• Compressibility Compensation: Automatic
• Shutdown File: Protected in non-volatile memory
• Flow Stability Test: Pump flow diagnostic to verify proper pump performance
• Diagnostics: Diagnostic tests to verify proper electrical and mechanical operation
• Communications: Hardwire external events connector. Run and Stop remote inputs; Ready, Run, Timed Event and Analog Pressure outputs. SCM400 degas communication port.
• Ambient Environment: 10-40°C, 5-95% relative humidity, noncondensing.
  

Back to top

UV1000 Specifications:

• Wavelength Ranges: D2 lamp: 190 to 380 nm, W lamp: 366 to 800 nm
• Lamp: D2
• Wavelength Accuracy: ± 1.0 nm
• Wavelength Precision: <0.01 nm
• Bandwidth: 6 nm
• Range Selections: 3.0, 2.0, 1.0, 0.5, 0.2, 0.1, 0.05, 0.02, 0.01, 0.005, 0.002, 0.001, 0.0005 AUFS
• Absorbance Range: 0.0005 to 3.0 AUFS
• Absorance Linearity @ 254 nm: 3.0 AUFS
• Communications:
  - Romote Inputs: Run, Stop, and Zero
  - Romote Output: Ready

AS3000 Specifications:

• Vial capacity:
  - 120 vials in three removable trays
  - 105 vials with tray temperature control
• Variable-Volume:
  - Injection Precision: <0.5 % RSD @ 10 pL or greater
  - Injection Volume: 0.1 - 100 pL injection standard (250 uL syringe) up to 1000 uL injections with larger loops and syringes
• Fixed-Loop:
  - Injection Precision: <0.5% RSD @ 10 uL or greater
  - Injection Volume: 20 uL standard (250 uL syringe) 1000 uL injections with larger loops and syringes
• Sample Carryover:
  - <0.0 I% at 300 gL flush volume
  - 5 mL flush volumes can be set
• Minimum Sample Volume: 1 uL can be injected from 5 uL with an end-port needle
• Needle Height: Programmable in 0.1 mm increments
• Method Files: Protected in non-volatile memory
• Communications
  - Remote Inputs: Pump Ready, Inject Hold
  - Outputs Pump Stop, Autosampler Ready, Inject, Gradient Start, Four timed-event outputs
  - SpectraNETIRS-232 port
• Ambient Environment: 10° - 40°C, 5 - 95% relative humidity
• Dimensions: 37cm x 41 cmx 51 cm (HxWxD)