 |
Contact GenTech |
Request Service |
|
Home |
GC |
Mass
Spec |
HPLC |
Other |
New
Instruments |
Parts
Department |
Vacuum
Pumps |
Service |
|
|
|
BRAND
NEW BTU Gas Analyzer GC System
$10,495*
The
BTU Gas Analyzer GC system is pre-plumbed
and ready to measure N2, methane, CO2, ethane, H2O, propane,
iso- and normal pentanes, iso- and normal pentanes, and
C6 plus backflush. The main benefits of the SRI
BTU Gas Analyzer GC are simplicity, low cost, and
the ability to determine the water content of the gas.
The BTU Gas Analyzer GC uses just a single
10-port gas sampling valve and two columns, and is tolerant
of valve timing variations or operator adjustments.
Features:
-
TCD
Detector
-
10-port
Gas Sampling Valve
-
1-meter
Hayesep-D Packed Column
-
30-meter,
0.53mm MXT-1 Capillary Column
-
1
channel PeakSimple Data System on the compact 8610C
chassis
Includes
TWO (2) YEAR WARRANTY.
Does not include computer or monitor - requires
Windows 2000 or newer and USB 2.0 capable.
(VOLTAGE:
for 110VAC, use "part number-1" [ex:8610-0073-1]
for 220VAC, use "part number-2")
Options
& Upgrades:
- Additional
detectors 6 channel USB PeakSimple data system
- FID-Methanizer
- Split/Splitless
and PTV injectors
- additional
valves
- additional
columns
*All
prices are in U.S. dollars and do not include shipping, handling
and installation. International
Cooperating Organizations
|
Unlike
the widely used competitive micro GCs, the BTU Gas
Analyzer GC is not only tolerant of water in the
sample gas, but it actually generates a quantifiable water
peak. The seven minute analysis may be longer than a micro
GC analysis, but the BTU GC does not need
baking out between runs. Therefore, about the same number
of runs may be made per day with the BTU GC
as with a typical micro GC.
The chromatogram shows the separation of a
natural gas sample in less than seven minutes by an SRI
BTU GC.
|
GenTech Scientific, BTU Gas Analyzer GC System
|
|
© 2005 GenTech Scientific, Inc.