Agilent/HP 6890A GC with Dual Split/Splitless Injector/Dual FID
$24,000

Agilent/HP 6890 GC System includes dual Split/Splitless Injectors, dual Flame Ionization Detector, Electronic Pressure Control on detector and injectors, HPIB Communications installed on GC, manuals, and ONE (1) YEAR WARRANTY.

Additional or alternative detectors available.

HP 5890/6890 GC Starter Kit - $978

*All prices are in U.S. dollars and do not include shipping, handling and installation. International Cooperating Organizations

Specifications | Back to HP GC Systems

Specifications

Data communications

• HP-IB, RS-232-C, and two analog output channels (1-mV, 1-V, and 10-V output available) as standard
• INET interface optional

Heated zones

• Independent heated zones, not including oven: six (two inlets, two detectors, and two auxiliary)
• Maximum operating temperatures for auxiliary zones: 400° C

Column oven

• Operating temperature: 4° C above ambient to 450° C
• Temperature setpoint resolution: 1° C
• Maximum run time: 999.99 min
• Programming ramps/plateaus: 6/7

Inlets

• All inlets include septum purge.
• Split/splitless: electronic flow, 400° C max, electronic entry of pressure or flow and split ratio version.
• Pressure setting range: 0-100 psi
• Total flow setting range: split/splitless, 0-200 ml/min N₂, 0-1000 ml/min H₂ or He

Detectors: All detectors include electronic on/off of all detector gases.

FID
• 450° C maximum operating temperature
• Automatic flame ignition from the keypad or ChemStation
• Flame out detection
• MDL: <5 pg carbon/s as propane using N₂ carrier and 0.2794-mm jet
• Linear dynamic range: < 10%, 10⁷ with N₂ carrier and 0.2794-mm jet

NPD
• 400° C maximum operating temperature
• Automatic baseline adjusting via keypad or ChemStation
• MDL: <0.4 pg N/s, <0.2 pg P/s with azobenzene/malathion mixture
• Selectivity: 35000 to 1 gN/gC, 75000 to 1 gP/gC with azobenzene/malathion/ octadecane
• Dynamic range: >10⁵ N >10⁵ P with azobenzene/malathion mixture

TCD
• 400° C maximum operating temperature
• Single filament with microcell
• MDL: <400 pg propane/ml He caxrier (MDL may be affected by laboratory environment.)
• Linear dynamic range: 10⁵ (5%)

ECD
• Equipped with anode purge for contamination resistance
• 400° C maximum operating temperature
• Makeup gas types: argon (5%)/methane, nitrogen
• Radioactive source: 15 mCi ⁶³Ni plated
• MDL: <0.04 pg/s lindane
• Dynamic range: > 10⁴ with lindane

Back to top