Shimadzu GC-2010 Single Split/Splitless Injector
$6,900*

Back to GC Systems

Specifications

Specifications

Column Oven
Temperature Range	(Ambient + 4°C) ~ 450°C (using LCO2 gas: -50°C - 450°C)
Inner Dimensions and Volume	280 (W) x 280 (H) x 175 (D) mm, 13.7L
Temperature accuracy	±1% of the set temperature in Kelvin unit (calibration at 0.01°C increments)
Temperature Variation Coefficient	0.01°C/°C
Temperature Program Steps	Up to 20 (cooling program possible)
Programmed rate setting range	-250°C ~ 250°C/min
Total time for all steps	9999.99 minutes max.

Injection Ports
Temperature Range	Up to 400°C
Heating Settings	1°C steps
No. of units installed simultaneously	Up to 3 units
Sample injection unit types	Split/splitless injection is standard Direct (without split) injection unit (option) On-column/PTV (programmable temperature vaporizer)injection unit (option)

Flow Control Unit
Advanced Flow Controller (AFC)
Split/splitles injection mode and direct injection mode	Pressure range: 0-970kPa
Programmable Steps	7 (Negative pressure step is available)
Programmed Rate Setting Range	-400 ~ 400kPa/min
Split Ratio Range	0 - 9999.9
Mass Flow Rate Setting Range	0 - 1200mL/min
Constant Linear Velocity	Maintains optimum separation at all times

Available Optional Accessories
AOC-20i Auto Injector	Direct injection, PTV/LVI, 1 - 250 uL syringes, ambient headspace
AOC-20s Auto Sampler	150 1.5mL vials or 96 4mL vials and barcode reader
Leap Combi-Pal Autosampler	SPME, headspace and micro-titer plate sampling capability
PY2020D Pyrolyzer	Single or double shot includes autosampler

Detectors
Four detectors can be installed simultaneously and individually temperature controlled. Detector gas is electronically controlled by APC (Advanced Pressure Control)
Detector Type(s)	FID, TCD, ECD, FPD, FTD
Flame Ionization Detector (FID)
Temperature Range	450°C max.
Minimum detected quantity	3pgC/s (Dodecane)
Dynamic Range	107
Thermal Conductivity Detector (TCD)
Temperature Range	400°C max.
Dynamic Range	105
Sensitivity	20,000 mV - mL/mg (Decane)
Electron Capture Detector (ECD)
Temperature Range	350°C max.
Minimum detected quantity	8fg/s
Dynamic Range	104
Flame Photometric Detector (FPD)
Temperature Range	350°C max.
Dynamic Range	P: 104 S: 103
Minimum detected quantity	P: 0.2pgP/s (tributyl phosphate) S: 4pgS/s (dodecane thiol)
Flame Thermionic Detector (FTD) (Two types, one for capillary and one for packed. The specifications are the same.)
Temperature Range	450°C max.
Dynamic Range	N: 104 P: 104
Minimum detected quantity	N: 0.2pgN/s (azobenzene) P: 0.03pgP/s (malathion)
Maximum of 2 detectors to keep instrument performance

Dimensions, Weight, Power Requirements (GC main unit)
Dimensions	515 (W) x 440 (H) x 530 (D) mm
Weight	30 kg (FID model)
Power Requirements	AC100V/120V 230V 1800VA (Normal oven type) or 2600VA (High power oven type), 50/60Hz