HP 5890 Series II GC with Dual FID $7,995* Includes Dual Split/Splitless Injectors, Dual Flame Ionization Detectors, INET Communications installed on GC, cables, manuals and ONE (1) YEAR WARRANTY. Other injectors and detectors available. HPIB Communications and Data System available. Available in HP Parts. HP 5890/6890 GC Starter Kit - $978 *All prices are in U.S. dollars and do not include shipping, handling and installation. International Cooperating Organizations Specifications | Back to HP GC Systems

Specifications:

Heated Devices

• Five heated zones standard: Two detectors, Two inlets, one auxiliary
• Methods stored: Two

Split/Splitless Capillary

• Range to 400° C in 1° C increments
• Back-pressure design permits independent adjustment of split flow rate without affecting column flow.
• Septum purge built in at 3 ml/min
• Accepts columns up to 1.2-mm od
• Multimode design includes split and splitless injection.
• Splitless purge time variable in 0.01-min elements
  

Flame Ionization Detector

• Range to 450° C
• Grounded jet and current limited design for operator safety
• Push-button flame ignition
• Sensitive:
  > 18 mCoul/gm carbon: nitrogen carrier, 0.018-in. id jet
  > 15 mCoul/gm carbon: helium carrier, 0.018-in. id jet
  > 22mCoul/gm carbon: nitrogen carrier, 0.018-in. id capillary jet
  > 18 mCoul/gm carbon: helium carrier, 0.018-in. id capillary jet
• Minimum detectable: <5 pg carbon/sec, nitrogen carrier at S/N=2
• Linear dynamic range: <+/- 10% over a 10 ⁷ range with 0.018-in. id jet
• Conditions: column flow 50 ml/min, 45 ml/min H₂, 650 ml/min air, propane sample

Column Oven

• Operating range: 4° C above ambient to 450° C
• Setpoint entry: 1° C for temperatures, 0.1° C for program rates
• Programming: Rates 0.1 to 70° C per min, 650 min maximum run time, three ramps with initial/final holds